Printing On Custom Size Paper - Oki MC363 Advanced Manual

6
Open the file to print.
7
Select [Print] from the [File] menu.
8
Click [Advanced].
9
Click [Advanced] on the [Layout] tab and select [PostScript Custom Page
Size] from [Paper size].
10
Click [OK].
11
Select [Multi-Purpose Tray] from [Paper Source] on the [Paper/Quality] tab.
12
Change other settings if necessary, and then click [OK].
13
Click [Print] on the [Print] screen.
For Mac OS X
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Select [Manage Custom Sizes] from [Paper Size].
4
Click [+] to add an item to the list of paper sizes.
5
Double-click [Untitled], and then enter a name of the long paper size.
6
Enter values in [Width] and [Height].
7
Click [OK].
8
Select the registered paper size from [Paper Size].
9
Select [Multi-Purpose Tray] for [All Pages From] on the [Paper Feed] panel.
10
Change other settings if necessary, and then click [Print].
If setting details are not displayed in the print dialog box, click [Show Details] at the bottom of the dialog box.

Printing on Custom Size Paper

• Loading Custom Size Paper
• For Windows PCL Printer Driver
• For Windows PS Printer Driver
• For Mac OS X
Set a custom paper size and paper type on the operator panel. Then, register a paper size
with a printer driver.
Paper sizes of 64 to 216 mm in width and 90 to 1321 mm in length can be registered.
• Register paper in portrait, and load paper in a tray in portrait.
• If the paper length exceeds 432 mm (17 inches), use the rear output tray.
• This function may not be available for some applications.
• If the paper length exceeds 432 mm (17 inches), the print quality cannot be guaranteed.
• If paper is so long that it exceeds the paper supports of the MP tray, support the paper with your hands.
• It is not recommended to use a paper width of less than 100 mm (3.9 inches), because paper jams may result.
• About available paper sizes for each tray and for duplex printing
Loading Paper (User's Manual)
• The auto tray switch function is set to [ON] by factory default. When a tray runs out of paper during printing, another
tray automatically starts feeding paper. To feed custom size paper from a specified tray, set the auto tray switch
function to [OFF].
• If images are not correctly printed on large size paper, select [Normal(600x600dpi)] for [Quality] in the PS printer
driver. Printing may be improved.
Loading Custom Size Paper
When printing on custom paper size, change the paper type setting, and specify a paper tray.
1
Load paper that can be set to the custom size in the MP tray or tray.
2
Press the (SETTING) button on the operator panel.
3
Press the button to select [Paper Setup] and press the
4
Press the or button to select the tray on which paper is loaded in step
1, and then press the
5
Check that [Paper Size] is selected, and then press the
- 84 -
button.
button.
4. Print
button.