Table of Contents
Advertisement
Changing the Standard Originator Name
If you have the sender (originator) name that is frequently used, it is recommended to specify
the name as the standard originator name.
1
Press the
(SETTING) button on the operator panel.
2
Press the
button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the
button to select [User Install] and press the
5
Press the
or
button repeatedly to select [Standard TTI] and press the
button.
6
Select the sender ID to register, and then press the
7
Press the
button until the home screen is displayed.
Disclosing a Sender Name (Originator) to the Recipient
Changing the Sender Name That is Printed on Faxes
Adding a Prefix (Prefix)
• Registering a Prefix
• Using a Prefix When Sending a Fax
• Using a Prefix When Registering a Speed Dial Number
You can add a prefix to a destination number. You can also attach a prefix when registering a
number to speed dial.
button.
(OK) button.
Registering a Prefix
You must register the prefix to [Prefix] in advance. You can enter up to 40 digits.
You can use symbols, such as "#" or "*".
button.
Entering Fax Number to Send a Fax (User's Manual)
1
Press the
2
Press the
button.
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the
5
Press the
6
Press the
button.
7
Enter a prefix.
8
Select [Enter], and then press the
9
Press the
- 154 -
(SETTING) button on the operator panel.
button once to select [Admin Setup] and press the
button to select [Fax Setup] and press the
button to select [Other Settings] and press the
or
button repeatedly to select [Prefix] and press the
(OK) button.
button until the home screen is displayed.
5. Fax
button.
(OK) button.
button.
button.
Advertisement
Table of Contents
