Network Menu - Oki MC363 Advanced Manual

Item Factory default setting
Text Height Same
Private Print Setup (Except MC363)
Item Factory default setting
Verify job option Disable
Erase job option No overwrite
Keep job for 2 hours
Job Limitation Disable
Job Password Authentication OFF
Description
Sets the height of a character.
SAME: The height stays the same
• Network Setup
regardless of CPI.
• Mail Server Setup
DIFF: The height varies according to
CPI. • LDAP Server Setting
• Secure Protocol Server Setting
Network Setup
Description
Set whether to verify a job before • Network Setting
printing.
If enabled, the machine verifies that
the job is not altered before starting
printing. The security is enhanced,
however it will take longer to start
printing.
Set how to delete a job.
You can overwrite deleted data so that
it will not be restored.
If enabled, it will take longer to delete.
Available value: No overwrite/Zero out
once
Set the storage period of jobs.
If the set period elapses after jobs are
stored, the jobs will be automatically
deleted.
Available value:
15 minutes/30 minutes/1 hour/
2 hours/4 hours/8 hours/12 hours/1
day/2 days/3 days/4 days/5 days/6
days/7 days
Sets whether to save a restricted print
job.
If [Private Print Only] is selected, print
jobs other than private print are not
accepted.
Sets whether to verify a job password
when the access control is enabled.
- 280 -

Network Menu

Item Factory default setting
Enabling Default Gateway Wired
Wired Enable
TCP/IP Enable
NetBIOS Over TCP Enable
IP Address Set Auto
IPv4 Address 192.168.100.100
Subnet Mask 255.255.255.0
Gateway Address 0.0.0.0
DHCPv6 Disable
DNS Server (Primary) 0.0.0.0
DNS Server (Secondary) 0.0.0.0
9. Operating Management/ Specifications
Description
Sets which default gateway to be enabled
between wired LAN or wireless LAN.
This item is displayed, if wireless LAN
module is fitted.
Sets whether to enable wired LAN.
Sets whether to enable TCP/IP.
Sets whether to enable NetBIOS over TCP/
IP.
This item is displayed when TCP/IP protocol
is enabled.
Sets the method of assigning an IP address.
Sets an IP address.
This item is displayed when TCP/IP protocol
is enabled.
Sets a subnet mask.
This item is displayed when TCP/IP protocol
is enabled.
Sets a gateway address.
This item is displayed when TCP/IP protocol
is enabled.
Selects enable / disable of DHCP when IPv6
is used.
Sets the IP address for a Primary DNS
server.
This item is displayed when TCP/IP protocol
is enabled.
Sets the IP address for a Secondary DNS
server.
This item is displayed when TCP/IP protocol
is enabled.