Table of Contents
Advertisement
Specifying a Destination Using One-touch Button
1
Press the
(SCAN) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Check that [E-mail] is selected, and then press the
4
Check that [Add Destination] is selected, and then press the
5
Press the
(One-touch) button to which the destination is registered.
If you register E-mail addresses, the first 16 E-mail addresses are automatically registered to the
touch) buttons No. 1 to 16.
Press the
(SCAN) button to specify E-mail addresses registered to the
to 16 as destinations.
To select the
(One-touch) buttons No. 9 to 16, press the
(SHIFT) button pressed.
6
Set scan settings if necessary.
7
Press the
(OK) button.
8
Press the
(MONO) or
(COLOR) button.
Specifying a Destination from Transmission History
1
2
3
button.
4
button.
5
6
(One-
(One-touch) buttons No.1
7
(One-touch) button with the
8
9
- 56 -
Press the
(SCAN) button on the operator panel.
Set a document in the ADF or on the document glass.
Check that [E-mail] is selected, and then press the
Press the
or
button to select [Tx History] and press the
Select the destination.
You can select multiple items.
When you complete the selection of all the destinations, press the
button.
Set scan settings if necessary.
Press the
(OK) button.
Press the
(MONO) or
(COLOR) button.
3. Scan
button.
button.
(OK)
Advertisement
Table of Contents
