Table of Contents
Advertisement
Setting Power Save Mode (Configuration Tool)
Set the length of idle time before entering Power Save mode.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Click the [Device Setting] tab.
4
Click [Menu settings].
5
Click
(Display administrator settings).
6
Enter the administrator password, and then click [OK].
The factory default password is "999999".
7
Click
in order of [Admin Setup] > [Management] > [Power Save].
8
Select the transition time from [Power Save Time], and then click
device).
Setting Sleep Mode (Configuration Tool)
Set the length of idle time before entering Sleep mode.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Click the [Device Setting] tab.
4
Click [Menu settings].
5
Click
(Display administrator settings).
6
Enter the administrator password, and then click [OK].
The factory default password is "999999".
7
Click
in order of [Admin Setup] > [Management] > [Power Save].
8
(Save to
Select the transition time from [Sleep Time], and then click
device).
Restrictions in Power Saving Function (User's Manual)
- 405 -
11. Utility Software
(Save to
Advertisement
Table of Contents
