Section 5: Troubleshooting; Testing; Viewing Troubles From The Integrated Keypad - DSC iotega WS910 Reference Manual

Wireless security and automation system

Hide thumbs

Table Of Contents

Table of Contents

5.1 Testing

Power up the system

Program options as required (see programming section)

Trip then restore zones

Verify correct reporting codes are sent to the central monitoring station

5.2 Viewing Troubles from the Integrated Keypad

1. Move your hand over the iotega to illuminate the keypad.

2. Press * 2 .

3. Enter your access code if required. The Trouble LED on the keypad flashes if an access code is needed to view

troubles. Entering a valid access code silences trouble beeps.

4. The keypad displays top-level troubles present on the system by illuminating numbers on the keypad. Refer to the

table below for the meaning of each trouble code. When in the top level trouble display, the trouble LED flashes

once, pauses, then repeats.

5. If additional details are available for the trouble, the [*] key illuminates. Press any illuminated number to display the

second level troubles.

6. The keypad displays a second level of detail for the trouble code selected in step 5 by illuminating numbers on the

keypad. Refer to the table below for the meaning of each trouble code. When in the second level trouble display, the

trouble LED flashes two times, pauses, then repeats.

7. If additional details are available for the trouble, the [*] key illuminates. Press any illuminated number to display the

third level trouble detail.

8. The keypad displays the device number with the trouble condition. If more than one device has this trouble at the

same time, the keypad cycles though each one. When in the third level trouble display, the trouble LED flashes three

times, pauses, then repeats.

9. Press the [*] key to acknowledge a trouble.

Note: Pressing the # key returns you to the previous level. Pressing the # key while in the top-level exits the trouble menu.

Trouble Summary

Trouble [01] - System Trouble

Trouble [02] - Zone

Trouble [03] - Siren

Trouble [04] - Keypad

Trouble [05] - Repeater

Trouble [06] - Wireless Key

Trouble [07] - Communication

Trouble [00] - Integrator Trouble

Table 6-1

Trouble Indications

1 st Layer

System Trouble

Zone