Table of Contents
Advertisement
SIA Feature
Programming Section
Cancel Annunciation
Panel Settings>Panel Con-
figuration>System Configuration>
> Reporting
Duress Feature
Cross Zone Timer
Panel Settings>Panel Con-
figuration>Partition Configuration
>Cross Zone Delay
Swinger Shutdown for Alarms
Panel Settings>Zones> Swinger
Shutdown
24 hour auto verified Fire
System Test:
The system activates all keypad sounders, bells or sirens for 2 seconds and all keypad lights turn
on. Refer to the User Manual.
Panel Settings> Dia-
gnostics> Sys-
tem>System Test
Panel Settings> Dia-
This mode is used to test each zone on the system for proper functionality.
gnostics> System>
Device> Begin Walk
Test
For SIA CP-01 compliant installations, the minimum configuration is:
1) Control Panel: Model WS900-29, WS900-19
2) Annunciators for progress: Model WS900-29, WS900-19, PG9901, PG9911
3) Off Premise Transmission: Model WS900-29, WS900-19
4) Local alarm bell: WS900-29, WS900-19, PG9901, PG9911
5) Smoke Detector: Model PG9926, PG9916
6) Arming Device: Model WS900-29, WS900-19, PG9929, PG9939, PG9949
Comments
Access to the reporting code for Alarm
Canceled
Do not derive code from an existing
Master/User code (e.g., Master code is
1234, the duress code should not be
1233 or 1235)
Access to the programmable Cross Zone
timer
Access to the swinger shutdown limit for
zone alarms.
Access to 24 hour auto verified Fire
- 60 -
Range/Default
Annunciate that a Cancel
was transmitted. Default:
Enabled
No automatic derivative of
another user code. No
duplicates with other user
codes
Default: Disabled
May program Range: 001-
255 seconds. Default: 0
seconds
For all non-fire zones shut-
down at 1 or 6 trips
Default: 2 trips
Activates If a restore is Not
received within the spe-
cified time Default: dis-
abled
Requirement
Required
Allowed
Allowed
Required
(programmable)
Required
Advertisement
Table of Contents
