Table of Contents
Advertisement
Default:
000.000.000.000
Valid range:
000.000.000.000 to 255.255.255.255
Panel's Alternate DNS Server
This section is used to program the name of an alternate
Domain Name System server to be used if the preferred
DNS server is unavailable.
Note: To use the panel's alternate DNS server, the option
LAN/WLAN Obtain IP Address must be set to Static IP
address.
Default:
000.000.000.000
Valid range:
000.000.000.000 to 255.255.255.255
WiFi Country Code
This option is used to select the country of operation for the
alarm system.
Default:
CA (Canada)
Valid range:
US, AU, CA, UK, FR, SE, IL, None
WLAN SSID
This section is used to program a network name (unique
identifier) for the panel.
Default:
Valid range:
WLAN Client Control
This option is used to control WiFi client mode.
Default:
Enabled
Valid range:
Enabled/Disabled
WLAN Security Type
This option is used to select which encryption protocol the
system uses to secure the wireless network.
Default:
WPA2 PSK AES
Valid range:
WPA PSK TKIP
WPA PSK AES
WPA PSK TKIP AES
WPA2 PSK TKIP
WPA2 PSK AES
WPA2 PSK TKIP AES
MIXED MODE TKIP
MIXED MODE AES
MIXED MODE TKIP AES
WLAN Security Key
This section is used to program a password for the Wi-Fi net-
work.
Default:
None
Valid range:
32 character ACCII
Panel's Cellular Public APN
This section is used to program the Access Point Name of
the network used for cellular-data connectivity.
Section 4: Programming Options
None
Alphanumeric
Default:
Blank
Valid range:
32 ASCII characters or Null
Panel's Cellular Login User Name
This section is used to program a user name for cellular net-
work connection.
Default:
Blank
Valid range:
32 ASCII characters or Null
Panel's Cellular Login Password
This section is used to program a user password for cellular
network connection.
Default:
Blank
Valid range:
32 ASCII characters or Null
Time Zone
This option defines the time zone that the alarm system will
operate in.
From the list of valid entries, locate and select the appro-
priate time zone.
Default: US Eastern
Valid
US-Alaska, US-Aleutian, US-Arizona, US-Central, US-Eastern, US-
range:
Hawaii, US-Indiana-East, US-Indiana-Starke, US-Michigan, US-Moun-
tain, US-Pacific, US-Samoa, CA-Atlantic, CA-Central, CA-Eastern,
CA-Mountain, CA-Newfoundland, CA-Pacific, CA-Saskatchewan, CA-
Saskatchewan-East, CA-Yukon
4.2.3 User Configuration Options
This section describes programming options for configuring
system users.
User Partition Assignment
This section is used to assign system user 2-100 to an avail-
able partition. Users may be assigned to multiple partitions.
Basic/Standard users may only assign new users to par-
titions they themselves have permission to access.
Default:
Valid range:
User Access Code (Pin)
This section is used to program a 4-digit code used to
access the panel. Each user requires a code. Duplicate
codes are not permitted.
Installers do not have the ability to change the Master code,
but can reset it to factory default if necessary. See Default
Master Code.
Default:
Valid range:
User Access Level
Each system user is assigned an access level that determ-
ines the features they can use. All codes are 4-digit decimal
entries. Duplicate codes are not permitted.
- 24 -
1
1, 2, 3, 4, All
Blank
0000 to 9999
Advertisement
Table of Contents
