Table of Contents
Advertisement
Default:
Enabled
Valid range:
Enabled/Disabled
Siren Partition Assignment
This option is used to assign the wireless siren to an avail-
able partition.
Default:
Valid range:
Fire Alarm
When this option is enabled, the wireless siren sounds dur-
ing fire alarms.
Default:
Enabled
Valid range:
Enabled/Disabled
CO Alarm
When this option is enabled, the wireless siren sounds dur-
ing CO alarms.
Default:
Enabled
Valid range:
Enabled/Disabled
Burg Alarm
When this option is enabled, the wireless siren sounds dur-
ing burglary alarms.
Default:
Enabled
Valid range:
Enabled/Disabled
Flood Alarm
When this option is enabled, the wireless siren sounds for
flood alarms.
Default:
Enabled
Valid range:
Enabled/Disabled
Auto Tamper Alarm
When this option is enabled, the wireless siren sounds dur-
ing tamper alarms.
Default:
Disabled
Valid range:
Enabled/Disabled
Activity LED
When this option is enabled, the Activity LED flashes every
few seconds to indicate that the siren is enrolled and active.
Default:
Disabled
Valid range:
Enabled/Disabled
Volume Control
This option is used to control the volume of the wireless
siren.
Default:
Medium.
Valid range:
Low, Medium, High
Section 4: Programming Options
Squawk Control
This option is used to control wireless siren behavior during
an alarm.
Default:
Valid range:
Exit/Entry Beeps
1
When this option is enabled, the wireless siren beeps
1-4
whenever entry/exit zones are tripped.
Note: When set to Disable in Stay Mode, the siren still
beeps on entry/exit when the system is armed in Away
mode.
Default:
Valid range:
Siren Strobe Alarm
This option is used to control the behavior of the wireless
siren strobe light during an alarm.
Default:
Valid range:
4.7.3 Wireless Key Configuration
Options
The following sections are used for programming wireless
keys.
Wireless Key Enable/Disable
When this option is enabled, the alarm panel receives com-
mands from the enrolled wireless key.
Default:
Valid range:
Wireless Key Partition Assignment
This option is used to assign the wireless key to an available
partition.
Default:
Valid range:
Wireless Key Button Programming
This option is used to program functionality for all available
buttons on the wireless key. The number of buttons varies
depending on the model.
Note: Panic shall be disabled for PGx929 and PGx939 for
SIA installations.
Default: Button 1 = Away Arm*
Button 2 = Stay Arm*
Button 3 = Disarm*
Button 4 = Panic**
Button 5 = Quick Exit
Valid
Null, Disarm, Stay Arm, Away Arm, Global Stay Arm, Global Away
range:
Arm, Global Disarm, Quick Exit, Auxiliary Alarm, Panic Alarm
*Not applicable for PGx938.
- 33 -
Sounder Only
Disabled, Sounder Only, Strobe Only, Sounder and Strobe
Disabled
Disabled, Enabled, Disable in Stay Mode
Active Until Bell Time-out
Disabled, Active Until Disarmed, Active Until Bell Time-out
Enabled
Enabled/Disabled
1
1-4, ALL
Advertisement
Table of Contents
