Hitachi SJ Series User Manual page 718

Appendix 1
Monitors and parameters for changing the current
commands *1)
Code
FA-01 Main speed command monitor
FA-02 Auxiliary speed command monitor
FA-10 Acceleration time monitor
FA-12 Deceleration time monitor
FA-15 Torque command monitor
FA-16 Torque bias command monitor
FA-20 Position command monitor
FA-30 PID1 target value 1
FA-32 PID1 target value 2
FA-34 PID1 target value 3
FA-36 PID2 target value
FA-38 PID3 target value
FA-40 PID4 target value
*1) FA parameter indicates the current command
value, and automatically displays data of the
command destination that is being adopted.
Example 1: If the command destination is the
operator keypad, it can be changed
using the arrow keys.
Example 2: If the command destination is the
analog input Ai1, it can be changed
by changing input to the terminal
[Ai1].
Name
0.00~590.00 (Hz)
-590.00 - 590.00 (Hz) (for monitoring)
0.00 - 590.00 (Hz) (for setting)
0.00~3600.00 (s)
0.00~3600.00 (s)
-500.0~500.0 (%)
-500.0~500.0 (%)
When [AA121]≠10 or [AA123]≠03
-268435455~+268435455 (pls)/
When [AA121]=10 and [AA123]=03
-1073741823~+1073741823 (pls)
0.00~100.00 (%)
(adjustable in [AH-04][AH-05][AH-06])
0.00~100.00 (%)
(adjustable in [AJ-04][AJ-05][AJ-06])
0.00~100.00 (%)
(adjustable in [AJ-24][AJ-25][AJ-26])
0.00~100.00 (%)
(adjustable in [AJ-44][AJ-45][AJ-46])
Appendix 1-7
Data range
List of Parameters
Note Page
13-3
13-3
13-6
13-6
12-11-15
12-11-12
12-17-30
12-10-7
12-10-20
12-10-21
12-10-21