Hitachi SJ Series User Manual page 142

Chapter 10 Chapter 10 Chapter 10
Setting item Setting item
③
STOP
Output Frequency Output Frequency
AA111
First operation command selection First operation command selection First operation command selection
00:[FW]/[RV] terminal 00:[FW]/[RV] terminal
Menu
④
STOP
Output Frequency Output Frequency
bC110
First electronic thermal level First electronic thermal level First electronic thermal level
Menu
10.4.3 10.4.3 Supplement Supplement
!
• • Check the setting of the motor capacity, the number Check the setting of the motor capacity, the number Check the setting of the motor capacity, the number Check the setting of the motor capacity, the number Check the setting of the motor capacity, the number
of motor poles, frequency, voltage, and current in poles, frequency, voltage, and current in poles, frequency, voltage, and current in poles, frequency, voltage, and current in poles, frequency, voltage, and current in
order to conduct motor control. order to conduct motor control. order to conduct motor control.
• IM: Induction motor • IM: Induction motor
General
Code
motor items motor items
Capacity [Hb102]
Number of [Hb103]
motor poles
[Hb104]
Frequency
[Hb105]
Voltage [Hb106]
Current [Hb108]
• • SM (PMM): Synchronous (permanent magnet) SM (PMM): Synchronous (permanent magnet) SM (PMM): Synchronous (permanent magnet) SM (PMM): Synchronous (permanent magnet) SM (PMM): Synchronous (permanent magnet)
motor
General
Code
motor items motor items
Capacity [Hd102] [Hd102]
Number of [Hd103] [Hd103]
motor poles
[Hd104] [Hd104]
Frequency
[Hd105] [Hd105]
Voltage [Hd106] [Hd106]
Current [Hd108] [Hd108]
• See "12.3 Basic Settings for Motor" for details. • See "12.3 Basic Settings for Motor" for details. See "12.3 Basic Settings for Motor" for details. See "12.3 Basic Settings for Motor" for details.
H03 H03
M1
0.00 Hz
Option Option
60.00Hz 60.00Hz
H03 H03
M1
0.00 Hz
25.0 A
[0.0-75.0]
Option Option
60.00Hz 60.00Hz
Setting range (unit) Setting range (unit) Setting range (unit)
0.01~160.00 (kW) 160.00 (kW)
2 to 48 (poles) 2 to 48 (poles)
10.00~590.00 (Hz) 590.00 (Hz)
10.00~590.00 (Hz) 590.00 (Hz)
1~1000 (V) 1000 (V)
0.01~10000.00 (A) 10000.00 (A)
Setting range (unit) Setting range (unit) Setting range (unit)
0.01~160.00 (kW) 160.00 (kW)
2 to 48 (poles) 2 to 48 (poles)
10.00~590.00 (Hz) 590.00 (Hz)
10.00~590.00 (Hz) 590.00 (Hz)
1~1000 (V) 1000 (V)
0.01~10000.00 (A) 10000.00 (A)
Note Note
③ Operation command destination selection [AA111]
Operation command destination selection [AA111] Operation command destination selection [AA111] Operation command destination selection [AA111] Operation command destination selection [AA111] Operation command destination selection [AA111]
When the operation command destination is set to When the operation command destination is set to When the operation command destination is set to When the operation command destination is set to When the operation command destination is set to When the operation command destination is set to
"00:[FW]/[RV] "00:[FW]/[RV] terminal", the display will disappear "00:[FW]/[RV] terminal", the display will disappear terminal", the display will disappear terminal", the display will disappear
from the area for displaying function of RUN key from the area for displaying function of RUN key from the area for displaying function of RUN key from the area for displaying function of RUN key from the area for displaying function of RUN key
on operator keypad at the bottom. on operator keypad at the bottom. on operator keypad at the bottom. on operator keypad at the bottom.
※ Normal/reverse rotation can be set at [FW]/[RV]
Normal/reverse rotation can be set at [FW]/[RV] Normal/reverse rotation can be set at [FW]/[RV] Normal/reverse rotation can be set at [FW]/[RV] Normal/reverse rotation can be set at [FW]/[RV]
terminal. terminal.
④ Setting the electronic thermal level of motor
Setting the electronic thermal level of motor Setting the electronic thermal level of motor Setting the electronic thermal level of motor Setting the electronic thermal level of motor
[bc110] [bc110]
Set the level so that it does not exceed the rated Set the level so that it does not exceed the rated Set the level so that it does not exceed the rated Set the level so that it does not exceed the rated Set the level so that it does not exceed the rated
current of motor. current of motor. current of motor.
Note that the motor may be burned if the Note that the motor may be burned if the Note that the motor may be burned if the Note that the motor may be burned if the
electronic thermal level is not appropriately set. electronic thermal level is not appropriately set. electronic thermal level is not appropriately set. electronic thermal level is not appropriately set. electronic thermal level is not appropriately set.
※ The electronic thermal for protecting the inverter
The electronic thermal for protecting the inverter The electronic thermal for protecting the inverter The electronic thermal for protecting the inverter The electronic thermal for protecting the inverter
works automatically. works automatically. works automatically.
• In the initial state, the motor is In the initial state, the motor is In the initial state, the motor is In the initial state, the motor is in the V/f control
mode, in which voltage is output proportional to the mode, in which voltage is output proportional to the mode, in which voltage is output proportional to the mode, in which voltage is output proportional to the mode, in which voltage is output proportional to the mode, in which voltage is output proportional to the
frequency for induction motor control. frequency for induction motor control. frequency for induction motor control. frequency for induction motor control.
For control modes, see "12.9 Selecting the Motor For control modes, see "12.9 Selecting the Motor For control modes, see "12.9 Selecting the Motor For control modes, see "12.9 Selecting the Motor For control modes, see "12.9 Selecting the Motor
Control Mode according to Motor and Load". Control Mode according to Motor and Load". Control Mode according to Motor and Load". Control Mode according to Motor and Load". Control Mode according to Motor and Load".
10-7
Test Run Run
in the V/f control