Hitachi SJ Series User Manual page 109

Chapter 9 Chapter 9
9.4.2 9.4.2 Setting Screen "Concurrent Monitor" Setting Screen "Concurrent Monitor" Setting Screen "Concurrent Monitor" Setting Screen "Concurrent Monitor" Setting Screen "Concurrent Monitor"
Q
・ ・I want to change the monitor used when changing
I want to change the monitor used when changing I want to change the monitor used when changing I want to change the monitor used when changing I want to change the monitor used when changing
a parameter while performing monitoring. a parameter while performing monitoring. a parameter while performing monitoring. a parameter while performing monitoring.
!
・ ・What is displayed on the upper monitor of the
What is displayed on the upper monitor of the What is displayed on the upper monitor of the What is displayed on the upper monitor of the
setting screen "Concurrent monitor" (H03) is the setting screen "Concurrent monitor" (H03) is the setting screen "Concurrent monitor" (H03) is the setting screen "Concurrent monitor" (H03) is the setting screen "Concurrent monitor" (H03) is the
same as that same as that displayed on the first line of three displayed on the first line of three- displayed on the first line of three
monitor screen "Multi-monitor" (H01) and the monitor screen "Multi
screen with large characters, "Big monitor" (H04). screen with large characters, "Big monitor" (H04). screen with large characters, "Big monitor" (H04). screen with large characters, "Big monitor" (H04). screen with large characters, "Big monitor" (H04).
▼
・ ・On the screen that is displayed upon power
On the screen that is displayed upon power-on, On the screen that is displayed upon power On the screen that is displayed upon power
using the right and left ( using the right and left ( using the right and left (
"H03".
Example) Change the output frequency monitor to Example Change the output frequency monitor to Change the output frequency monitor to Change the output frequency monitor to Change the output frequency monitor to
the PID1 output monitor. the PID1 output monitor. the PID1 output monitor.
Set-up procedure up procedure
Output Frequency Output Frequency
FA-01
dA-01
Output frequency monitor Output frequency monitor Output frequency monitor
db-50
PID1 output monitor PID1 output monitor
PID1 output monitor PID1 output monitor
FA-01
monitor" (H01) and the monitor" (H01) and the
on,
) keys, navigate to keys, navigate to
0.00 Hz 0.00 Hz
0.00 Hz 0.00 Hz
[0.00-60.00] 60.00]
0.00 Hz 0.00 Hz
0.00 % 0.00 %
0.00 Hz 0.00 Hz
0.00 Hz 0.00 Hz
[0.00-60.00] 60.00]
A A
・On the setting screen, you can control parameter
On the setting screen, you can control parameter On the setting screen, you can control parameter On the setting screen, you can control parameter On the setting screen, you can control parameter
data while performing monitoring. data while performing monitoring. data while performing monitoring. data while performing monitoring. To change the
selected data, the screen changes to the setting selected data, the screen changes to the setting selected data, the screen changes to the setting selected data, the screen changes to the setting selected data, the screen changes to the setting
screen that shows options. screen that shows options. screen that shows options. screen that shows options.
STOP
Output Frequency Output Frequency
-line
Menu oFW oFW
Action Action
4.2.1 Press the SEL(O) key to change the color of 4.2.1 Press the SEL(O) key to change the color of Press the SEL(O) key to change the color of Press the SEL(O) key to change the color of
parameter field. Using the up and down parameter field. Using the up and down parameter field. Using the up and down parameter field. Using the up and down (
keys to select and navigate to the detail of keys to select
monitoring. To 4.2.2 monitoring.
4.2.2 4.2.2 When the SEL(O) key is pressed, the When the SEL(O) key is pressed, the When the SEL(O) key is pressed, the When the SEL(O) key is pressed, the left-most
letter of the parameter can be changed. To letter of the parameter can be changed. To letter of the parameter can be changed. To letter of the parameter can be changed. To
4.2.3
4.2.3 Using the arrow ( 4.2.3 Using the arrow (
01] to [db- -50]. To 4.2.4
4.2.4 4.2.4 Press the SEL(O) key to confirm the monitoring Press the SEL(O) key to confirm the monitoring Press the SEL(O) key to confirm the monitoring Press the SEL(O) key to confirm the monitoring Press the SEL(O) key to confirm the monitoring
target, which is then displayed in the upper target, which is then displayed in the upper target, which is then displayed in the upper target, which is then displayed in the upper
section.
Press the F1(1) key to return to the monitor. Press the F1(1) key to return to the monitor. Press the F1(1) key to return to the monitor. Press the F1(1) key to return to the monitor.
You can also configure parameters using the You can also configure parameters using the You can also configure parameters using the You can also configure parameters using the
up and down ( up and down
9-14
Operating Instructions Operating Instructions Operating Instructions Operating Instructions
To change the
H03 H03
M1
0.00 Hz
60.00 Hz
[0.00-60.00]
Optional Optional
60.00Hz 60.00Hz
device device
and navigate to the detail of and navigate to the detail of
) keys, change [dA , change [dA-
To 4.2.4
) keys ) keys .
) )
most