Hitachi SJ Series User Manual page 118

Chapter 9
9.9 Supplementary Information
Back to the home monitor
Q
・I want to go back to the home monitor.
A
・Press the F1 key repeatedly to go back to the
home monitor. When home is shown above the F1
key, you can go back to the home monitor, and
navigate through the home monitor using the right
and left keys.
Display (B) Details of warning status display
Q
・I see icons with "NRDY", "LIM", and "ALT", but I
don't know what they mean.
A
・When the up key is pressed while a monitor screen
other than the trip history "Total monitor" is
displayed, the screen changes to the monitor
where you can check the current status. Press the
SEL(O) key, down key, and F1 key to go back.
Switch between normal/reverse rotations on the
operator keypad
Q
・I want to switch between the normal rotation and
reverse rotation on the operator keypad in a simple
manner.
A
・By pressing the down key on the three-line monitor
screen "Multi-monitor", you can specify F1
(normal rotation) or F2 (reverse rotation). To go
back to the monitor, press the up key.
I want to delete saved data that I read.
Q
・I want to delete saved data that I read using the
read function.
A
・By performing initialization of the operator keypad
on the System settings screen, you can delete
data that is saved using the read function.
However, note that the settings of the operator
keypad are also initialized.
9-23
Operating Instructions