Feature Option Descriptions - Firstech CM-7000 Master Manual

CM7 Master Guide
Special Feature group 3
S-#3
Programmable (-) Input Connector
1 PIC #1 (Default: (-) E-Brake Input)
2 PIC #2 (Default: (-) Trunk Input)
3 PIC #3 (Default: (-) Keysense input)
4 PIC #4 (Default: (-) door input)
5 PIC #5 (Default : (-) Hood)
6 PIC #6 (Default: (-) Pre-warn)
7 PIC #7 (Default: (-) Instant Trigger)

Feature Option Descriptions

FO = Feature Option
1-01 Unlock before, Lock after:
FO1 - Off
FO2 - On: Sends an unlock command as soon as the remote start sequence is triggered then send a relock
command as soon as the CM7 has confirmed remote start success.
FO3 - Lock after start only: Sends a lock command after the CM7 has confirmed remote start
success.
FO4 - Lock after shutdown only: will send a lock command only after the CM7 has successfully shut
down. Note: It will not provide an output if the CM7 is shut down with an emergency override input.
(i.e. hood pin, or foot brake input)
1-02 Door Lock/Unlock output Pulse Duration: This does not affect the behavior of the factory arm output
(orange wire) or factory alarm disarm output (orange/white wire).
FO1 - 0.8 seconds: (-) Negative lock and unlock output time.
FO2 - 2.5 seconds: (-) Negative lock and unlock output time.
FO3 - 0.125 seconds: (-) Negative lock and unlock output time. This option may be helpful when using
lock/unlock to arm/disarm vehicles that may roll windows down with factory Arm/Disarm wires when
the standard output is too long.
FO4- 3.5 seconds: (-) Negative lock and unlock output time.
1-03 Driver's Priority Unlock:
FO1 - Off: (default)
FO2 - On: This feature will allow the user to unlock the driver's door first. If the unlock button is pressed
again within 4 seconds, the other doors will unlock. The driver's door unlock must be isolated from the
other doors and use the blue (-) unlock. The Orange/Black (-) 2nd unlock (POC setting) is used to provide
unlock output to unlock all other doors.
Copyright 2016 Fi rstech ,
LLC.
(-) E- Brake Input [1]
(-) Trunk Input [2]
(-) Key Sense Input [3]
(-) Hood Input [4]
(-) Door Input [5]
(-) Trigger Start Input [6]
(-) Glow Plug Input [ 7 ]
Alarm and Starter System
Setting Value
Optional
(-) Disable Arm/Disarm/Trigger
Start input [ 8 ]
(N/C) Trunk Input [9]
(N/C) Key Sense Input [10]
(N/C) Hood Input [11]
(N/C) Door Input [12]
(-) Pre-warn Input [13]
(-) Instant Trigger Input [14]
www.firstechdata.com
(-) Arm Input [15]
(-) Disarm Input [16]
(-) IGN & Sensor Bypass
Input [17]
(-) AUX 1 trigger input
[18]
(-) AUX 2 trigger input
[19]
Page 34