Fx Return Channel Parameter Strip - Roland VS-2000 Owner's Manual Addendum

6—VGA Main Display CH VIEW Screens

FX Return Channel Parameter Strip

1. Channel Name
2. FX Bus ASSIGN
Each FX bus is routed to the input of its same-
numbered effect processor.
3. GROUP Selector
To assign the channel to a fader group, click GROUP
and select the desired group from the pop-up menu.
4. MONO Switch
By default, the output of an effect processor is stereo.
To collapse its left and right sides to a mono signal,
click MONO so it lights.
5. FX LINK Button
To link the parameter of FX send, click FX LINK so it lights. When it's lit,
parameters will be linked with add/even numbered partners.
6. AUTOMIX STATUS Button
Click the AUTOMIX STATUS button repeatedly to set the channel's
status as desired when Automix mode is on.
62 www.Roland.com Roland VS-2000 Owner's Manual, Version Two Addendum
228
228
228
229
343
1.
2.
3.
4.
5.
6.