Zooming The Sample Display (Zoom); Auditioning The Edited Result (Preview); Exporting The Sample In Wav Format (Export Sample); Importing An Audio File (Sample Import) - Roland FA-07 Reference Manual

Editing a Sample

Zooming the Sample Display (Zoom)

You can change the magnification at which the sample is displayed.
1.
In the SAMPLE EDIT screen (p . 81), press the
button .
2.
Use the cursor buttons to change the display zoom .

Auditioning the Edited Result (Preview)

Here's how to audition the result of your sample editing.
1.
In the SAMPLE EDIT screen (p . 81), press the
button .
The sample plays.
Exporting the Sample in WAV Format
(Export Sample)
Here's how to export the sample in WAV format.
1.
In the SAMPLE EDIT screen (p . 81), press the
Utility) button .
2.
"Export Sample (WAV),"
Move the cursor to
[7] (Select) button .
A confirmation message appears.
If you decide to cancel, press the
3.
Press the [6] (OK) button .
The exported WAV file is saved in the SD card's
folder.
* If there is an identically-named file in the export-destination,
"Overwrite?"
a message asks
want to overwrite, or press the
to cancel.
NOTE
Never turn off the power while data is being exported.
MEMO
•
You can export all samples of the song in a single operation (p.
76).
•
If you execute Truncate before you export, the WAV between the
start point and end point is exported.
82
[5] (Zoom)
[6] (Preview)
[4] (Sample
and press the
[7] (Cancel) button.
"EXPORT SAMPLE"
[6] (OK)
Press the button if you
[7] (Cancel) button if you decide

Importing an Audio File (Sample Import)

You can import an audio file and play it as one of the FA's samples.
1.
Before you continue, place the audio file to be imported in
the "IMPORT" folder of the SD card .
2.
Press the [PAD UTILITY]
3.
Press the [5] (Sample Import)
4.
[DEC] [INC]
Use the dial or the
file that you want to import, and press the
button .
MEMO
• By pressing the [4] (Auto Import)
samples to multiple vacant pads in a single operation. Proceed
to step 6. If there are no vacant pads, importing is not possible.
• You can change the import-source folder.
Press the [2] (Folder) button to access the Change Folder
window. When you select the import-source folder, the files in
the selected folder are shown in the SAMPLE IMPORT screen.
5.
Press a pad to select the import-destination pad .
6.
Press the [7] (Execute)
A confirmation message appears.
If you decide to cancel, press the
7.
Press the [6] (OK) button .
The WAV file is imported.
Audio files that can be imported
Sampling frequency
WAV/AIFF
Bit rate
Format
Sampling frequency
MP3
Bit rate
Switching the Sample Information
Display (Change Information)
You can switch the sample information that is shown in the SAMPLE
PAD screen.
1.
In the SAMPLE PAD screen (p . 81), press the
Information) button .
The displayed information changes each time you press the button.
•
•
•
•
•
•
button .
button .
buttons to select the audio
[7] (Select)
button you can import
button .
[7] (Cancel)
button.
44.1/48/96 kHz
8/16/24 bit
MPEG-1 audio layer 3
44.1 kHz
64/80/96/112/128/160/192/
224/256/320 kbps,
VBR (Variable Bit Rate)
[3] (Change
Sample name
GATE and LOOP on/off status
EFFECT SW on/off status
Sample name
Stereo/mono
Sample size