Specifying The Song (Smf) Playback Mode (Smf Play Mode); Selecting The Format For Recording (Recording Mode); Changing How The Pedal Effects Are Applied (Damper Pedal Part); Changing How The Pedals Work (Center Pedal) - Roland DP603 Owner's Manual

Indication Value

Specifying the Song (SMF) Playback Mode (SMF Play Mode)

When playing back a song (SMF), select the appropriate setting depending on whether you're playing an internal song or external data.
MEMO
You can also switch the SMF Play Mode by holding down the [s] button and using the [–] [+] button.
SMF Play Mode
Auto Select
Internal
External

Selecting the Format for Recording (Recording Mode)

You can choose whether to record as SMF or as audio.
Recording Mode
MEMO
You can also switch the Recording Mode by holding down the [t] button and using the [–] [+] button.
SMF
Audio
Refer to "Renaming a Song (Rename Song)" (p. 13).
Rename Song
Refer to "Copying a Saved Song (Copy Song)" (p. 14).
Copy Song
Refer to "Deleting a Saved Song (Delete Song)" (p. 14).
Delete Song
Refer to "Saving Piano Settings (Piano Setup Export)" (p. 18).
Piano Setup Export
Piano Setup Import Refer to "Loading Piano Settings (Piano Setup Import)" (p. 18).

Changing How the Pedal Effects Are Applied (Damper Pedal Part)

When you press the damper pedal during Dual Play or Split Play, the pedal effect is normally applied to both tones, but you can also select the tone
to which the effect is to be applied.

Damper Pedal Part

Right & Left
Right
Left

Changing How the Pedals Work (Center Pedal)

When you turn on the power, the center pedal functions as the sostenuto pedal (p. 6).
You can change the function of the pedal to a variety of other operations.
* Pedal function settings take priority in the following order: "Reg. Pedal Shift" 0 "Page Turn (p. 24)" 0 "Center/Left Pedal. "

Center Pedal

Sostenuto
Play/Stop
Layer

Changing the Effect of the Pedal (Left Pedal)

When you turn on the power, the left pedal functions as a soft pedal (p. 6).
You can change this to perform other functions.
* Pedal function settings take priority in the following order: "Reg. Pedal Shift" 0 "Page Turn (p. 24)" 0 "Center/Left Pedal. "

Left Pedal

Soft
Play/Stop
Layer

Using a Pedal to Switch Registrations (Reg. Pedal Shift)

You can assign a pedal to successively switch registrations Each time you press the pedal, you will switch to the next registration.
* Pedal function settings take priority in the following order: "Reg. Pedal Shift" 0 "Page Turn (p. 24)" 0 "Center/Left Pedal. "
Reg. Pedal Shift
Off
Left Pedal
Center Pedal
Refer to "Saving a Registration Set (Registration Export)" (p. 17).
Registration Export
Registration Import Refer to "Loading a Saved Registration Set (Registration Import)" (p. 17).

Adjusting the Brightness of the Display (Display Contrast)

Display Contrast
You can adjust the brightness of the unit's display.
1–10

Specifying a Maximum Volume (Volume Limit)

Volume Limit You can specify a maximum volume value. This prevents an unnecessarily high volume from sounding even if you inadvertently operate the
[Volume] buttons.
20, 40, 60, 80, 100
Explanation
Automatically switches the SMF Play Mode to either "Internal" or "External" depending on the song that is being played.
The most suitable tone for the song that's playing is selected.
This setting is ideal when playing back an internal song or a song that was recorded on this unit.
The currently selected tone is used when you play back the song.
This setting is ideal when playing back external data such as commercially available music data.
SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub different parts.
The recording will be made as audio data. The recorded song can be used in your computer.
All enabled
Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
Sets function to sostenuto pedal.
The pedal will have the same function as the [s] button.
Pressing the pedal will layer on Tone 2, used for Dual Play.
* The Layer function can be applied only when using Dual Play.
The pedal functions as a soft pedal.
The pedal has the same function as the [s] button.
Pressing the pedal adds tone 2 of the Dual Play function.
* This is available only when using Dual Play.
Pressing the pedal does not change the registration.
The soft pedal can be used only for switching registrations In this case, the function assigned to the soft pedal cannot be
used.
The sostenuto pedal can be used only for switching registrations In this case, the function assigned to the sostenuto pedal
cannot be used.
Advanced Operation
21