Preparation - Omron ZX2-LDA41 User Manual

Selection menu
Either input the timing signal from an external device, or enter the trigger
for starting sampling by pressing the
signal is ON is the sampling period.
(Default)
Timing input
The sampling period is the period that the measured value is lower than
the specified self-trigger level. Hold measurement is possible without a
sync input.
Self-trigger level
The sampling period is the period that the measured value is greater than
the specified self-trigger level. Hold measurement is possible without a
sync input.
Self-trigger level
Measured value
4
Trigger level setting
Button
Display
Operation
[Change numeric value]
Set any value.
Press to set.
ZX2 User's Manual
ON
OFF
Sampling period
Measured value
Sampling period
Sampling period
Description of Operation
Press the button to display
.
Press the button to enable
setting of the self-trigger level.
Press the
the digit, press the
change the numeric value, and
set the self-trigger level.
Details
button. The period that the timing
(For details on external inputs, see page 118.)
Hysteresis width
Operation point
Return point
Hysteresis width
Operation point
Return point
Sampling period
button to move * If the
button to when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
Setting the Hold Function
Explanation of
Selection Menu
Default value: 0.000
button is pressed
CONTENTS
INTRODUCTION

PREPARATION

FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
97