Omron ZX2-LDA41 User Manual page 74

5
Scaling
Button
CONTENTS Operation
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
Press to display.
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
[Change numeric value]
Double
Sheet
Detection
Press to set.
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
[Change numeric value]
SPECIFI-
CATIONS
INDEX Press to set.
SETTING
TRANSITION
CHARTS
74
Eccentricity and Surface Deflection
Set this item to change the display scale when you want to
display a digital value on the Amplifier Unit different from the
Optional
actual measured value. (e.g. to reverse the - and + indications)
Display Description of Operation
Press the
Press the
.
Press the
setting of scaling.
Press the
Press the
setting of S1-Before.
Press the
the digit, press the
change the numeric value, and
[Numeric
set the measured value before
value before
S1 is changed.
change]
Set any value.
Press the
the numeric value of S1-Before.
Press the
Press the
setting of S1-After.
Press the
the digit, press the
change the numeric value, and
[Numeric
set the measured value after S1
value after
is changed.
change]
Set any value.
Press the
the numeric value of S1-After.
button to display
.
button to display
button to enable
button to display
.
button to enable
button to move
button to
button to apply
button to display
.
button to enable
button to move
button to
button to apply
Explanation of
Selection Menu
Default value: OFF
To set the NEAR and FAR sides
as - and + indications to the
sensor:
-2 1
2 -1
2
1
-1
-2
S1
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
ZX2 User's Manual
Before
After
S2