Omron ZX2-LDA41 User Manual page 100

2
Bank switching
Button
Operation
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
Press to select
OPERATION
BASIC
SETUP
3
MAIN
APPLICATIONS
Various settings
& SETTING
METHODS
Set the various menu items that require setting.
Height
Execute smart tuning for each bank to be used because the smart tuning results are not
Steps applied to other banks.
and
Warpage
4
Double
Return to RUN mode
Sheet
Detection
Button
Operation
Thickness
Positioning
Hold down for
3 seconds
Eccentricity
and Surface
Deflection
The following explains how to switch banks and perform measurement.
DETAILED
Either switch banks by following the steps 1 → 2 → 4 described above, or input the
SETTINGS
required signal from an external device to switch the bank.
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
100
Bank Setting
Display Description of Operation
Press the
Press the
bank.
Select the
desired value.
Press the
the setting.
Display Description of Operation
Hold down the
Out
three seconds to switch to the
RUN mode.
button to display
.
button to select the
button to apply
button for
Explanation of
Selection Menu
Default value: 0
to
Explanation of
Selection Menu
ZX2 User's Manual