Selection menu
OFF (default)
Hold measurement is not performed. The measured value is output at all
times.
The average measured value during the sampling period is held. The output
changes at the end of the sampling period and is held until the end of the
next sampling period.
The difference between the minimum and maximum values during the
sampling period is held. This option is selected mainly to detect vibration.
The output changes at the end of the sampling period and is held until the
end of the next sampling period.
The measured value at the start of the sampling period is held. The output
changes at the end of the sampling period and is held until the end of the
next sampling period.
The minimum value during the sampling period is held. The output changes
at the end of the sampling period and is held until the end of the next
sampling period.
The maximum value during the sampling period is held. The output changes
at the end of the sampling period and is held until the end of the next
sampling period.
ZX2 User's Manual
Current
measured
value
Sampling period
Maximum value
Current
measured
value
Sampling period
Current
measured
value
Sampling period
Current
measured
value
Sampling period
Maximum value
Current
measured
value
Sampling period
Details
Output
(average of measured values)
Output
Minimum
(maximum value - minimum value)
value
Output
Minimum
value
Output
Output
Setting the Hold Function
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
95