Omron ZX2-LDA41 User Manual page 70

Button
Operation
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
[Change numeric value]
FLOW OF
OPERATION
Press to set.
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
[Change numeric value]
Positioning
Eccentricity
Press to set.
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
70
Positioning
Display Description of Operation
Press the
Press the
setting of S2-Before.
Press the
the digit, press the
change the numeric value, and
set the measured value before
[Numeric
S2 is changed.
value before
change]
Set any value.
Press the
the numeric value of S2-Before.
Press the
Press the
setting of S2-After.
Press the
the digit, press the
change the numeric value, and
set the measured value after S2
[Numeric
is changed.
value after
change]
Set any value.
Press the
the numeric value of S2-After.
button to display
.
button to enable
button to move
button to
button to apply
button to display
.
button to enable
button to move
button to
button to apply
Explanation of
Selection Menu
58
42
8
-8
S1
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
ZX2 User's Manual
After
Before
S2