Introduction - Omron ZX2-LDA41 User Manual

The displayed and set up menus differ depending on the channel when two or more
Amplifier Units are connected and when mutual interference prevention is set to ON.
Use the Amplifier Units of the corresponding channel numbers to specify settings by
referring to the tables below.
<Menus and setting channels when two or more Amplifier Units are connected>
CHs Used to
Menu Specify
Settings
Mutual interference CH1
prevention
Two-sensor CH2 to
operation setting CH5
Thickness setting
Bank switching CH1
setting
Initialization CH1
<Menus and setting channels when mutual interference prevention is set to ON>
CHs Used to
Menu Specify
Settings
Response time CH1
setting
Smart tuning CH1
(For details on the setup procedure when mutual interference prevention is set to
ON, see the next page.)
ZX2 User's Manual
CHs Not Used to Specify Settings
CH2 to CH5: These cannot be used.
(The setting menu is not displayed on
the digital display.)
CH1: This cannot be used.
(The setting menu is not displayed on
the digital display.)
CH2 to CH5: These cannot be used.
(The setting menu is not displayed on
the digital display.)
CH2 to CH5: These cannot be used.
(The setting menu is not displayed on
the digital display.)
CHs Not Used to Specify Settings
CH2 to CH5: These cannot be used.
(The setting menu is not displayed on
the digital display.)
CH2 to CH5: Smart tuning cannot be
executed for these separately.
Connecting Two or More Amplifier Units
Notes
The setting of CH1 is also
applied to Amplifier Units of CH2
and later.
• The Amplifier Units of CH2
and later are switched
together with CH1. (Bank
registration is possible for
individual amplifier units.)
• Also use CH1 to switch the
banks by means of an
external input.
The Amplifier Units of CH2 and
later are initialized together with
CH1.
Notes
The setting of CH1 is also
applied to Amplifier Units of CH2
and later.
Smart tuning for the Amplifier
Units of CH2 and later are
executed together with CH1.
CONTENTS

INTRODUCTION

PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
87