Preparation - Omron ZX2-LDA41 User Manual

3
Self-trigger setting
Button
Operation
CONTENTS
INTRODUCTION

PREPARATION

FOR
MEASUREMENT
FLOW OF
Press to select
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
96
Setting the Hold Function
Display Description of Operation
Press the
Press the
self-trigger.
Select the
desired value.
Press the
the self-trigger.
When
proceed to the next item, and
when
proceed to "5 Return to RUN
mode."
button to display
.
button to select the
button to apply
and
are selected,
is selected,
Explanation of
Selection Menu
Default value: TIMING
Enter the trigger by using the
timing input or by pressing
the button in the RUN
mode. The period that the
timing signal is ON is the
sampling period.
The sampling period is the
period that the measured
value is lower than the
specified self-trigger level.
The sampling period is the
period that the measured
value is greater than the
specified self-trigger level.
(For details, see the
following page.)
ZX2 User's Manual