Omron ZX2-LDA41 User Manual page 7

Disclaimers
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of Omron's test conditions, and the user must correlate it to actual
application requirements. Actual performance is subject to the Omron's Warranty and
Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on
improvements and other reasons. It is our practice to change part numbers when
published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice.
When in doubt, special part numbers may be assigned to fix or establish key
specifications for your application. Please consult with your Omron's representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be
accurate; however, no responsibility is assumed for clerical, typographical or proofreading
errors or omissions.
ZX2 User's Manual
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
7