Omron ZX2-LDA41 User Manual page 69

Button
Display
Operation
[Change numeric value]
[Numeric
Press to set.
value before
change]
Set any value.
[Change numeric value]
[Numeric
Press to set.
value after
change]
Set any value.
ZX2 User's Manual
Description of Operation
Press the button to display
.
Press the button to enable
setting of S1-Before.
Press the button to move
the digit, press the button to
change the numeric value, and
set the measured value before
S1 is changed.
Press the button to apply
the numeric value of S1-Before.
Press the button to display
.
Press the button to enable
setting of S1-After.
Press the button to move
the digit, press the button to
change the numeric value, and
set the measured value after S1
is changed.
Press the button to apply
the numeric value of S1-After.
Explanation of
Selection Menu
<To display the actual sensing
distance>
-8 0 8
58 50 42
58
42
8
-8
S1
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
Positioning
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
After
FLOW OF
OPERATION
Before
BASIC
SETUP
S2
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
69