Omron ZX2-LDA41 User Manual page 48

Button
Operation
CONTENTS
INTRODUCTION
PREPARATION
FOR
Press to display.
MEASUREMENT
FLOW OF
OPERATION
3
Mutual interference prevention
BASIC
SETUP
(Use CH1 for these settings.)
MAIN
Button
APPLICATIONS
Operation
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Press to display.
Positioning
Eccentricity
and Surface
Deflection
4
Response time setting
DETAILED
SETTINGS
If mutual interference prevention is ON:
If mutual interference prevention is set to OFF: Use CH1 and CH2 for these settings.
TROUBLE-
SHOOTING
Button
Operation
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
48
Steps and Warpage
Display Description of Operation
Press the
.
Press the
display to
the detail menu.
Press the
the setting.
Display Description of Operation
Press the
Amplifier Unit to display
Press the
.
Press the
the setting.
Required
Display Description of Operation
Press the
.
button to display
button to set the
to set display of
button to apply
Set this item to prevent the influence of mutual
Optional
interference between two Sensor Heads.
button on the CH1
.
button to display
button to apply * For details on the response
time when connecting two or
more Amplifier Units, see
page 86.
Select the response time to match the size
and moving speed of the sensing object.
Use CH1 for these settings.
button to display
Explanation of
Selection Menu
Explanation of
Selection Menu
Default value: OFF
Explanation of
Selection Menu
Default value: 500 ms
ZX2 User's Manual