Precautions For Safe Use; Basic Setup - Omron ZX2-LDA41 User Manual

Please observe the following precautions for safe use of the products.
Installation Environment
• Do not use the product in environments where it can be exposed to inflammable/
explosive gas.
• Do not install the product close to high-voltage devices and power devices in order
to secure the safety of operation and maintenance.
Power Supply and Wiring
• The supply voltage must be within the rated range (DC12 to 24 V±10%).
• Reverse connection of power supply is not allowed. Connection to AC power supply
is also not allowed.
• Open-collector outputs should not be short-circuited.
• High-voltage lines and power lines must be wired separately from this product.
Wiring them together or placing in the same duct may cause induction, resulting in
malfunction or damage.
• Always turn off the power supply before connecting or disconnecting cables and
connectors.
Applicable standards
• EN61326-1
• Electromagnetic environment : Industrial electromagnetic environment
• There may be cases that current output or voltage output fluctuate within 1%F.S
when a sensor is experienced electromagnetic interference under the condition of
the response time 30µs.
Others
• Do not attempt to dismantle, repair, or modify the product.
• Dispose of this product as industrial waste.
ZX2 User's Manual

Precautions for Safe Use

(EN/IEC 61326-1 Table 2)
CONTENTS
INTRODUCTION
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
11