Omron ZX2-LDA41 User Manual page 50

6
2-sensor operation (A-B)
CONTENTS
(Use CH2 for these settings.)
Button
INTRODUCTION
Operation
PREPARATION
FOR
MEASUREMENT
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Press to select
Height
Steps
and
Warpage
Double
Sheet
Detection
7
Threshold setting
Thickness
(Use CH2 for these settings.)
Positioning
Button
Operation
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
50
Steps and Warpage
Required
Display Description of Operation
Press the
Amplifier Unit to display
Press the
.
Press the
the setting.
Required
Display Description of Operation
Press the
Amplifier Unit to display the
Lit
HIGH threshold.
Set this item when calculating the difference
between the measurement results from two
Sensor Heads. The measurement result for
CH1 is substracted from the measurement
result of the channel being set.
button on the CH2
.
(Calculation result is output.)
button to display
button to apply * For details on the response
time when connecting two or
more Amplifier Units, see
page 86.
Set the range of measured values to be judged as
PASS by setting the HIGH and LOW thresholds.
button on the CH2 Setting example:
Non-defective product step
3 to 8 mm
H
P
L
Set the MAX and MIN steps
to be regarded as OK to the
HIGH and LOW thresholds,
respectively.
Explanation of
Selection Menu
CH1
Calculating Unit
CH2
Explanation of
Selection Menu
NG
OK NG
8
3
ZX2 User's Manual