Precautions For Safe Use - Omron ZFV-A25-04 User Manual

Introduction

Precautions for Safe Use

Please observe the following precautions for safe use of the products.
(1) Installation Environment
• Do not use the product in environments where it can be exposed to inflammable/
explosive gas.
• Install the Amplifier Unit in such a way that the ventilation holes are not blocked.
• To secure the safety of operation and maintenance, do not install the product close to
high-voltage devices and power devices.
• During installation, make sure that screws are tightened firmly.
(2) Power Supply and Wiring
• The supply voltage must be within the rated range (DC24V±10%).
• Reverse connection of the power supply is not allowed.
• Open-collector outputs should not be short-circuited.
• Use the power supply within the rated load.
• High-voltage lines and power lines must be wired separately from this product. Wiring
them together or placing them in the same duct may cause induction, resulting in mal-
function or damage.
(3) Others
• During installation, make sure that screws are tightened firmly.
• Do not attempt to dismantle, repair, or modify the product.
• Dispose of this product as industrial waste.
• Should you notice any abnormalities, immediately stop use, turn OFF the power sup-
ply, and contact your OMRON representative.
ZFV
4
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Precautions for Safe Use