HP E1563A User Manual page 28

28 Digitizer Application Information
Table 2-1. Power-on and Reset States.
Parameter
INPut1:STATe
INPut2:STATe
INPut3:STATe
INPut4:STATe
OUTPut:TTLT0-7:SOURce
OUTPut:TTLT0-7:STATe
ROSCillator:SOURce
SWEep:POINts
SWEep:OFFSet:POINts
VOLT1:RANGe
VOLT2:RANGe
VOLT3:RANGe
VOLT4:RANGe
VOLT1:RESolution
VOLT2:RESolution
VOLT3:RESolution
VOLT4:RESolution
SAMPle:COUNt
SAMPle:PRETrigger:COUNt
SAMPle:SLOPe
SAMPle:SOURce
SAMPle:TIMer
TRIGger:LEVel1
TRIGger:LEVel2
TRIGger:LEVel3
TRIGger:LEVel4
TRIGger:SOURce1
TRIGger:SOURce2
TRIGger:SLOPe1
TRIGger:SLOPe2
Power-on/Reset State
ON (channel 1 input state)
ON (channel 2 input state)
ON (channel 3 input state)
ON (channel 4 input state)
TRIGger (all TTLTrigger lines)
OFF (all TTLTrigger lines)
INTernal
1 (one sample)
0 (no pretrigger samples)
256V (channel 1 range)
256V (channel 2 range)
256V (channel 3 range)
256V (channel 4 range)
7.8125 mV (channel 1 res)
7.8125 mV (channel 2 res)
7.8125 mV (channel 3 res)
7.8125 mV (channel 4 res)
1 (one sample)
0 (no pretrigger samples)
POSitive
TIMer (internal time base)
1.3 µS
-256V (channel 1 level)
-256V (channel 2 level)
-256V (channel 3 level)
-256V (channel 4 level)
IMMediate (source 1 not ch 1)
HOLD (source 2 not ch 2)
POSitive (slope 1 not ch 1)
POSitive (slope 2 not ch 2)