HP E1563A User Manual page 108

[SENSe:]
DATA? <Rdgs_per_channel>[,<channel_list>]
DATA:ALL? <Rdgs_per_channel>
DATA:COUNt? [MIN | MAX]
DATA:CVTable? <channel_list>
ROSCillator:EXTernal:FREQuency < freq >
ROSCillator:EXTernal:FREQuency?
ROSCillator:SOURce INTernal | EXTernal
ROSCillator:SOURce?
SWEep:POINts <neg_value> | MIN | MAX
SWEep:POINts? [MIN | MAX]
SWEep:OFFSet:POINts <neg_value> | MIN | MAX
SWEep:OFFSet:POINts? [MIN | MAX]
VOLTage[<channel>][:DC]:RANGe <range> | MIN | MAX
VOLTage[<channel>][:DC]:RANGe? [MIN | MAX]
VOLTage[<channel>][:DC]:RESolution? [MIN | MAX]
SAMPle
[:STARt | :SEQuence[1]]
:COUNt <count> | MIN | MAX
:COUNt? [MIN | MAX]
[:IMMediate]
:PRETrigger:COUNt <count> | MIN | MAX
:PRETrigger:COUNt? [MIN | MAX]
:SLOPe POS | 1 | NEG | 0
:SLOPe?
:SOURce HOLD | TIMer | TTLT0-7 | EXT
:SOURce?
:TIMer <interval> | MIN | MAX
:TIMer? [MIN | MAX]
108
Command Description
Read data from list of channels.
Read data from all channels.
Query available readings per channel.
Query last reading taken from channel.
Declare external source's frequency.
Set reference oscillator source.
Set number of sweep points.
Set number of sweep offset points.
Set channel's voltage range.
Query channel's resolution.
Set the number of samples to take.
Take a sample now.
Set the number of pretrigger samples.
Set the sample signal slope.
Set the sample source.
Set sampling interval for source TIMer.