Ieee 488.2 Common Command Quick Reference - HP E1563A User Manual

IEEE 488.2 Common Command Quick Reference

Category Command
System Data *IDN
Internal *RST
Operations
Internal *TST
Operations
Synchronization *OPC
*OPC?
*WAI
Status & Event *CLS
*ESE < unmask >
*ESE?
*ESR?
*SRE < unmask >
*SRE?
*STB?
Bus Operation *TRG
100 Digitizer Command Reference
The table below lists, by functional group, the IEEE 488.2 Common (*) Commands
that can be executed by the HP E1563A and HP E1564A Digitizers. However,
commands are listed alphabetically in the following reference. Examples are shown
in the reference when the command has parameters or returns a non-trivial response;
otherwise, the command string is as shown in the table. For additional information,
refer to IEEE Standard 488.2-1987.
Identification
Reset
Self-Test
Operation Complete
Operation Complete Query
Wait to Complete
Clear Status
Event Status Enable
Event Status Enable Query
Event Status Register Query
Service Request Enable
Service Request Query
Read Status Byte Query
Bus Trigger
Title
Returns the identification string of the
Digitizer which includes the latest
firmware version.
Resets the Digitizer to:
range:
input state:
input filter:
TTLT states: OFF
data format: ASCii
See Table 2-1 in Chapter 2 for the
module's complete reset state.
Returns "0" if self-test passes. Returns
a non-zero value if self-test fails. Use
SYST:ERR? to retrieve the error from
the Digitizer. See "Self-Test Errors" in
Appendix B for a complete list of error
numbers and their description. Return
the digitizer to Hewlett-Packard for
repair if repair is required.
Operation Complete Command
Operation Complete Query
Wait-to-Continue Command
Clear Status Command
Standard Event Status Enable Cmd
Standard Event Status Enable Query
Standard Event Status Register Query
Service Request Enable Command
Service Request Enable Query
Read Status Byte Query
When the digitizer is in the
wait-for-trigger state and the trigger
source is TRIGger:SOURce BUS, use
*TRG to trigger the digitizer.
Description
256V
ON
OFF