HP E1563A User Manual page 109

STATus
:OPERation:CONDition?
:OPERation[:EVENt]?
:OPERation:ENABle <unmask>
:OPERation:ENABle?
:PRESet
:QUEStionable:CONDition?
:QUEStionable[:EVENt]?
:QUEStionableENABle <unmask>
:QUEStionable:ENABle?
SYSTem
:ERRor?
:VERSion?
TEST
:ERRor?
:NUMBer? < test_number >
:TST[:RESults]?
TRIGger
[:STARt | :SEQuence[1]]
[:IMMediate]
:LEVel<channel> <voltage> | MIN | MAX
:LEVel<channel>? [MIN | MAX]
:MODE NORMal | MASTer | SLAVe
:MODE?
:SLOPe<n> POS | 1 | NEG | 0
:SLOPe<n>?
:SOURce<n> OFF | BUS | EXT | HOLD |
IMMediate | INTernal1-4 | TTLT0-7
:SOURce<n>?
Command Description
Read OPER:CONDition register.
Read OPER:EVENt register.
Unmask operation register bits.
Read OPER:ENABle register.
PRESet the status registers.
Read OPER:CONDition register.
Read OPER:EVENt register.
Unmask questionable register bits.
Read OPER:EVENt register.
Read system errors from error queue.
Query system version.
Return details about self-test errors.
Run a specific self-test.
Return results of the *TST command.
Trigger now.
Set trigger level for internal trigger.
Set trigger mode.
Set slope of trigger signal.
Set source of trigger signal.
109