Panasonic FP-E Programming Manual page 1200

Note1) If the operation mode is set to Two-phase, incremental/decremental, or incremental/decremental
control, the setting for CH9 is invalid in system register 400 and the setting for CHB is invalid in
system register 401.
Note2) If reset input settings overlap, the CH9 setting takes precedence in system register 400 and the
CHB setting takes precedence in system register 401.
Note3) CHA, CHB and CH1 input signals in system register 401 are the signals when the pulse I/O
cassette (AFPX-PLS) is installed in the cassette mounting part 2.
Note4) If the operation mode setting for the pulse output CH0 and CH1 is carried out, it cannot be used
as normal output.
When the operation mode for the pulse output CH0 is set to 1, the reset input setting for the
high-speed counter CH8 and CH9 is invalid.
When the operation mode for the pulse output CH1 is set to 1, the reset input setting for the
high-speed counter CHA and CHB is invalid.
Note5) Upgrade FPWIN GR to Ver2.6 or higher version if the No. of I/O allocation is indicated with 1-digit
number such as X0 in the setting window No. 400 and 401 of FPWIN GR.
5-112
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com