Panasonic FP-E Programming Manual page 1244

Table of system registers for FP2/FP2SH/FP10SH
Add-
Item
ress
Sequence program area
0 capacity setting
Available PLC: FP2
Alloca-
Machine language
tion of
program area capacity
1
user setting
memory Available PLC: FP2
Configuration capacity
2 setting
Available PLC: FP2
Battery error alarm
Memory
area
contents
setting at
INITIALIZE
position
Available
Action
4
on error PLC:
FP2SH,
FP10SH
Differential type
instructions setting
between MC and MCE
instructions
Available PLC: FP2SH,
FP10SH
TM instruction operation
setting
Available PLC: FP2SH,
FP10SH
Index modifier check
setting
5-156
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Default
Name
value
12K
words
0 word
0 word
Enabled
Internal relay
Cleared
(R)
Link relay (L) Cleared
Timers/
Counters (T, Cleared
C, SV, EV)
Data register
Cleared
(DT)
Link data
Cleared
register (LD)
File register
Cleared
(FL)
Index
Cleared
register (I)
Error alarm
Cleared
relay (E)
Conven-
tional
Conven-
tional
Enabled
Descriptions
FP2 (16K): 2 to 16K words
FP2 (32K): 2 to 32K words
FP2 (16K): 0 to 14K words
FP2 (32K): 0 to 30K words
FP2 (16K): 0 to 14K words
FP2 (32K): 0 to 30K words
Enabled: When a battery error
occurs, a self-diagnostic
error is issued and the
ERROR LED lights.
(BATT. LED lights.)
Disabled: When a battery error
occurs, a self-diagnostic
error is not issued and
the ERROR LED does
not light. (BATT. LED
does not lights.)
Cleared: When the initialize/ test
switch is set to
INITIALIZE position
while in the PROG.
mode, you can specify
the type of memory to
be cleared.
Not cleared: When the initialize/test
switch is set to
INITIALIZE position
while in the PROG.
mode, you can specify
the tyep of memory to
be not cleared
Conventional: Holds preceded result
in the MC and MCE instruction set.
New: Disregards preceded result in
the MC and MCE instruction set.
Conventional: Scan synchronous
New: Scan asynchronous
Enabled: Checks for overflow of the
index modifier area, and performs
normal processing.
Disabled: Performs processing
without checking for overflow of the
index modifier area.