Panasonic FP-E Programming Manual page 1255

FP1/FP-M/FP2/FP2SH/FP10SH/FP3
Address
R901D 2 s clock pulse relay
1 min clock pulse
R901E
relay
R901F Not used
R9020 RUN mode flag
Test RUN mode flag
R9021 (Available PLC: FP2/
FP2SH/FP3/FP10SH)
Break flag
R9022 (Available PLC: FP2/
FP2SH/FP3/FP10SH)
Break enable flag
R9023 (Available PLC: FP2/
FP2SH/FP3/FP10SH)
Output update enable
flag in the test RUN
R9024 mode
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
Single instruction flag
R9025 (Available PLC: FP2/
FP2SH/FP3/FP10SH)
Message flag
(Available PLC: FP-M
R9026 C20, C32/FP1 C24,
C40, C56, C72/FP2/
FP2SH/FP3/FP10SH)
R9027 Remote mode flag
Break clear flag
R9028 (Available PLC: FP2/
FP2SH/FP3/FP10SH)
R9029 Forcing flag
External interrupt
enable flag
(Available PLC: FP-
M/FP1 C24, C40, C56,
R902A
C72/FP2/FP2SH/FP3/
FP10SH)
Interrupt flag
(Available PLC: FP2)
Interrupt error flag
(Available PLC:
R902B FP-M/FP1 C24, C40,
C56, C72/FP2/FP2SH/
FP3/FP10SH)
R902C Sampling point flag
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Repeats on/off operations in 2 s cycles.
Repeats on/off operations in 1 min cycles.
-
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
Turns on while the initialize/test switch of the CPU is set to
TEST and mode selector is set to RUN. (test run operation
start)
Turns off during the normal RUN mode.
Turns on while the BRK instruction is executing or the step
run is executing.
Turns on while the BRK instruction is enabled in the test
RUN mode.
Turns on while the output update is enabled in the test RUN
mode.
Turns on while the single instruction execution is selected in
the test RUN mode.
Turns on while the F149 (MSG)/P149 (PMSG) instruction is
executed.
Turns on while the mode selector is set to REMOTE.
Turns on when the break operation is cleared.
Turns on during forced on/off operation for I/O relay and
timer/counter contacts.
Turns on while the external interrupt trigger is enabled by
the ICTL instruction.
Turns on while the periodical interrupt is executed by the
ICTL instruction.
Turns on when an interrupt error occurs.
Turns off during instructed sampling.
Turns on while sampling is triggered by the periodical
interrupt.
Description
5-167