Panasonic FP-E Programming Manual page 1185

(A: Available, N/A: Not available)
Register
No.
High-speed counter
DT90052 and pulse output
control flag
Real-Time Clock
DT90053 (Clock/Calendar)
monitor (hour/minute)
Real-Time Clock
(Clock/Calendar)
DT90054
setting
(minute/second)
Real-Time Clock
DT90055 (Clock/Calendar)
setting (day/hour)
Real-Time
DT90056 Clock(Clock/Calendar)
setting (year/month)
Real-Time Clock
(Clock/Calendar)
DT90057
setting (day-of-the-
week)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
A value can be written with F0 (MV) instruction
to reset the high-speed counter, disable
counting, continue or clear high-speed counter
instruction.
Control code setting
Note) Refer to the "Count for reset input" in
"Count 6.3.2 "Input Mode and Count"
Hour and minute data of the Real-Time Clock
(Clock/Calendar) are stored here. This data is
read-only data. It cannot be overwritten.
The year, month, day, hour, minute, second
and day-of-the-week data for the Real-Time
Clock(Clock/Calendar) is stored.
The built-in Real-Time Clock(Clock/Calendar)
will operate correctly through the year 2099
and supports leap years. The Real-Time Clock
(Clock/Calendar) can be set by writing a value
using a programming tool software or a
program that uses the F0 (MV) instruction.(see
example for DT90058)
As a day of the week is not automatially set on
FPWIN GR, fix what day is set to 00, and set
each value for 00 to 06.
Descriptions
Read Writ-
-ing ing
N/A A
A N/A
A A
5-97