Panasonic FP-E Programming Manual page 1285

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
- DT90401
- DT90402
- DT90403
- DT90404
- DT90405
- DT90406
- DT90407
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The first error alarm relay number which
went on is stored. The error has been
reset by executing a RST instruction.
Example 1: Using RST instruction
First error alarm
relay which went
on (Available
PLC: FP2SH/
FP10SH)
Example 2: Using RST instruction and
Second error
alarm relay
which went on
(Available PLC:
FP2SH/
FP10SH)
Third error alarm
relay which went
on (Available
PLC: FP2SH/
FP10SH)
Forth error alarm
The error alarm relay number which went
relay which went
on is stored. To reset the specified error
on (Available
alarm relay, use an RST instruction only.
PLC: FP2SH/
FP10SH)
Fifth error alarm
relay which went
on (Available
PLC: FP2SH/
FP10SH)
Sixth error alarm
relay which went
on (Available
PLC: FP2SH/
FP10SH)
Seventh error
alarm relay
which went on
(Available PLC:
FP2SH/
FP10SH)
Descriptions
DT90401
Read Writ-
-ing ing
A N/A
5-197