Panasonic FP-E Programming Manual page 1277

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9148 DT90148
(*Note1) (*Note1)
DT9149 DT90149
(*Note1) (*Note1)
DT9150 DT90150
(*Note1) (*Note1)
DT9151 DT90151
(*Note1) (*Note1)
DT9152 DT90152
(*Note1) (*Note1)
DT9153 DT90153
(*Note1) (*Note1)
DT9154 DT90154
(*Note1) (*Note1)
DT9155 DT90155
(*Note1) (*Note1)
DT9156 DT90156
(*Note1) (*Note1)
DT9157 DT90157
(*Note1) (*Note1)
DT9158 DT90158
(*Note1) (*Note1)
DT9159 DT90159
(*Note1) (*Note1)
Note1) Used by the system.
Note2) When the system register 46 = K0, First: PC link 0, second: PC link 1
When the system register 46 = K1, First: PC link 1, second: PC link 0
Note3) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The number of times the receiving operation is
performed (counted using ring counter)
The current interval between two receiving
operations: value in the register x 2.5 ms
The minimum interval between two receiving
operations: value in the register x 2.5 ms
MEWNET-
The maximum interval between two receiving
W/-P PC
link status operations: value in the register x 2.5 ms
[PC link 1
The number of times the sending operation is
(W/P)]
performed (counted using ring counter)
(*Note2, 3)
The current interval between two sending
operations: value in the register x 2.5 ms
The minimum interval between two sending
operations: value in the register x 2.5 ms
The maximum interval between two sending
operations: value in the register x 2.5 ms
MEWNET-
Area used for measurement of receiving
W/-P PC
interval.
link status
[PC link 0
Area used for measurement of sending
(W/P)]
interval.
(*Note2, 3)
MEWNET-
Area used for measurement of receiving
W/-P PC
interval.
link status
[PC link 1
Area used for measurement of sending
(W/P)]
interval.
(*Note2, 3)
Descriptions
Read Writ-
-ing ing
N/A N/A
5-189