Panasonic FP-E Programming Manual page 1140

WR903 FP0R
Relay No.
R9030 Not used
R9031 Not used
COM port
R9032 communication mode
flag
Print instruction
R9033
execution flag
RUN overwrite
R9034
complete flag
R9035 Not used
R9036 Not used
COM port
R9037 communication error
flag
COM port reception
done flag during
R9038
general purpose
communication
COM port
transmission done
R9039 flag during general-
purpose serial
communication
R903A Not used
R903B Not used
R903C Not used
R903D Not used
TOOL port reception
done flag during
R903E
general purpose
communication
TOOL port
transmission done
R903F flag during general-
purpose serial
communication
A: Available, N/A: Not available
Note) R9030 to R9030F can be changed during 1 scan.
5-52
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Turns on when the general-purpose communication function
-
is being used
Goes off when the MEWTOCOL-COM or the PLC link
-
function is being used.
Off: Printing is not executed.
On: Execution is in progress.
Goes on for ony the first scan following completion of a rewrite
during the RUN operation.
Goes on is a transmission error occurs during data
-
communication.
Goes off when a request is made to send data, using the
-
F159 (MTRN) instruction.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in general-
-
purpose serial communication.
Goes off when transmission is requested in general-purpose
-
serial communication.
Turns on the terminator is received during general -purpose
-
serial communication.
Goes on when transmission has been completed in general-
-
purpose serial communication.
Goes off when transmission is requested in general-purpose
-
serial communication.
Description