Panasonic FP-E Programming Manual page 1279

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9170 DT90170
DT9171 DT90171
DT9172 DT90172
DT9173 DT90173
DT9174 DT90174
DT9175 DT90175
DT9176 DT90176
DT9177 DT90177
DT9178 DT90178
DT9179 DT90179
DT9180 DT90180
DT9181 DT90181
DT9182 DT90182
DT9183 DT90183
DT9184 DT90184
DT9185 DT90185
DT9186 DT90186
DT9187 DT90187
DT9188 DT90188
DT9189 DT90189
DT9190 DT90190
DT9191 DT90191
DT9192 DT90192
DT9193 DT90193
DT9194 DT90194
Note) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Station number, whre the send area address
for the PC link is overlapped with this station,
is stored here.
Test result in the optical transmission path
test mode for MEWNET-P link system is
stored here.
Counts how many times a token is lost.
Counts how many times two or more tokens
are detected.
Counts how many times a signal is lost.
Counts how many times a synchronous
abnormality is detected.
Send NACK
Send NACK
Send WACK
Send WACK
Send answer
Send answer
Unidentified command
MEWNET-
Counts how many times a parity error is
W/-P link
detected.
status
End code receiving error
[W/P link 1]
Format error
(*Note)
Not support error
Self-diagnostic result
Counts how many times loop change is
detected.
Available PLC: FP3, FP10SH
Counts home many times link error is
detected.
Counts how many times main loop break is
detected.
Available PLC: FP3, FP10SH
Counts how many times sub loop break is
detected.
Available PLC: FP3, FP10SH
Loop reconstruction condition
Available PLC: FP3, FP10SH
Loop operation mode
Available PLC: FP3, FP10SH
Loop input status
Available PLC: FP3, FP10SH
Descriptions
Read Writ-
-ing ing
A N/A
5-191