Panasonic FP-E Programming Manual page 1128

FP-e (A: Available, N/A: Not available)
Register
No.
Real-Time Clock
(Clock/Calendar)
DT9054
setting
(minute/second)
Real-Time Clock
DT9055 (Clock/Calendar)
setting (day/hour)
Real-Time Clock
(Clock/Calendar)
DT9056
setting
(year/month)
Real-Time Clock
(Clock/Calendar)
DT9057
setting (day-of-the-
week)
Real-Time Clock
DT9058 (Clock/Calendar)
time setting
5-40
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The year, month, day, hour, minute, second and
day-of-the-week data for the Real-Time Clock
(Clock/Calendar) is stored. The built-in Real-
Time Clock(Clock/Calendar) will operate
correctly through the year 2099 and supports
leap years. The Real-Time Clock
(Clock/Calendar) can be set by writing a value
using a programming tool software or a program
that uses the F0 (MV) instruction.(see example
for DT90058)
By setting the highest bit of DT9058 to 1, the
time becomes that written to DT9054 to DT9057
by the F0 (MV) instruction. After the time is set,
DT9058 is cleared to 0. (Cannot be performed
with any instruction other than the F0 (MV)
instruction.)
<Example>
Set the time to 12:00:00 on the 5th day when
X0 turns on.
FPWIN GR:
If you changed the values of DT9054 to DT9057
with the programming tool software, the time will
be set when the new values are written.
Therefore, it is unnecessary to write to DT9058.
Descriptions
Read Writ
-ing -ing
A A
A A