Panasonic FP-E Programming Manual page 1292

Name Boolean
End ED
Conditional CNDE
end
Eject EJECT
Step ladder instructions
Start step SSTP
Next step NSTL
NSTP
Clear step CSTP
Clear multi- SCLR
ple steps
Step end STPE
Subroutine instructions
Subroutine CALL
call
Output off FCAL
type
subroutine
call
Subroutine SUB
entry
Subroutine RET
return
Interrupt instructions
Interrupt INT
Interrupt IRET
return
Interrupt ICTL
control
: Available, : Not available,
*1) In the FP2/FP2SH/FP10SH, when the number "n" of a subroutine program has an index modifier, the number of steps is
the number in parentheses.
5-204
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Symbol
The operation of program is ended.
Indicates the end of a main program.
The operation of program is ended when
the trigger turns on.
Adds page break fo ruse when printing.
The start of program "n" for process
control
Start the specified process "n" and clear
the
process currently started. (Scan
execution type)
Start the specified process "n" and clear
the
process currently started. (Pulse
execution type)
Resets the specified process "n".
Resets multiple processes specified by
"n1"
and "n2".
End of step ladder area
When the trigger is on: Executes the
subroutine.
When the trigger is off: Not execute the
subroutine. The output in the
subroutine is maintained.
When the trigger is on: Executes the
subroutine.
When the trigger is off: Not execute the
subroutine. But, the output in
the subroutine is cleared.
Indicates the start of the subroutine
program "n".
Ends the subroutine program.
Indicates the start of the interrupt program
"n".
Ends the interrupt program.
Select interrupt enable/disable or clear in
"S1" and "S2" and execute.
: Not available partially
Description
1
1
1
3
3
3
3
5
1
2
(3)
*1
4
(5)
*1
1
1
1
1
5