Panasonic FP-E Programming Manual page 1276

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9136 DT90136
DT9137 DT90137
DT9138 DT90138
DT9139 DT90139
DT9140 DT90140
(*Note1) (*Note1)
DT9141 DT90141
(*Note1) (*Note1)
DT9142 DT90142
(*Note1) (*Note1)
DT9143 DT90143
(*Note1) (*Note1)
DT9144 DT90144
(*Note1) (*Note1)
DT9145 DT90145
(*Note1) (*Note1)
DT9146 DT90146
(*Note1) (*Note1)
DT9147 DT90147
(*Note1) (*Note1)
Note1) Used by the system.
Note2) When the system register 46 = K0, First: PC link 0, second: PC link 1
When the system register 46 = K1, First: PC link 1, second: PC link 0
Note3) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
5-188
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Display the error conditions for 8 types of
errors using 1 byte.
Error code
of
MEWNET-F
(remote I/O)
system
Not used -
Not used -
The number of times the receiving operation is
performed (counted using ring counter)
The current interval between two receiving
operations: value in the register x 2.5 ms
The minimum interval between two receiving
operations: value in the register x 2.5 ms
MEWNET-
The maximum interval between two receiving
W/-P PC
operations: value in the register x 2.5 ms
link status
[PC link 0
The number of times the sending operation is
(W/P)]
performed (counted using ring counter)
(*Note2, 3)
The current interval between two sending
operations: value in the register x 2.5 ms
The minimum interval between two sending
operations: value in the register x 2.5 ms
The maximum interval between two sending
operations: value in the register x 2.5 ms
Descriptions
Read Writ-
-ing ing
A N/A
N/A N/A
N/A N/A