Msend Instruction - Mitsubishi QCPU Structured Programming Manual

ZP_MSEND
5.4.25

MSEND instruction

ZP_MSEND
Structured ladder
ZP_MSEND
EN ENO
Un*
s1
s2
Input argument EN:
Un*:
s1:
s2:
Output argument ENO:
d:
Function
This instruction sends an e-mail.
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
5-156
5.4.25 MSEND instruction
ST
ENO:= (EN, Un*, s1, s2, d);
ZP_MSEND
d
Executing condition
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
Variable that stores control data
Start number of the host station's device that stores the
contents of the sent e-mail (subject + attached file) or (subject
+ text)
Execution result
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
Setting Internal device
*1
data
Bit Word
−
S1
−
S2
d
Executing condition
ZP_MSEND
:Bit
:String
:Array of ANY16 [0..15]
:ANY16
:Bit
:Array of bit [0..1]
J \
R, ZR
U
Bit Word
*1: Local devices and file registers per program cannot be used as setting data.
ZP_MSEND
:
indicates the following instruction.
Zn Constant Others
\G
−
−
−