Mrecv Instruction - Mitsubishi QCPU Structured Programming Manual

5.4.24

MRECV instruction

ZP_MRECV
Structured ladder
ZP_MRECV
EN ENO
Un* d1
s d2
Input argument EN: Executing condition
Un*:
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
s: Variable that stores control data
Output argument ENO: Execution result
d1: Start number of the host station's device that stores the
contents of the received e-mail (header + attached file)
d2: Variable that turns ON upon completion of the instruction
d2[1] also turns ON at the time of error completion.
Setting
data
Function
This instruction reads received e-mail.
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
ST
ENO:= (EN, Un*, s, d1, d2);
ZP_MRECV
Internal device
R, ZR
*1
Bit Word
−
S
d1
d2
*1: Local devices and file registers per program cannot be used as setting data.
Executing condition
indicates the following instruction.
ZP_MRECV
:Bit
:String
:Array of ANY16 [0..15]
:Bit
:ANY16
:Array of bit [0..1]
J \
U \G
Bit Word
−
−
−
5.4.24 MRECV instruction
ZP_MRECV
ZP_MRECV
:
5
Zn Constant Others
5-153