9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9.1
Monitoring Product Information
9.1.1
Items That You Can Monitor
The items that you can monitor in the SigmaWin+ Product Information Window are listed
below.
Information on SERVOPACKs
Information on Servomotors
Information on Encoders
Information on Option Modules
9.1.2
Operating Procedures
Use the following procedure to display the product information monitor dialog box.
• Select Read Product Information in the Menu Dialog Box of the SigmaWin+. The Read
Product Information Window will be displayed.
Information
9-2
• SERVOPACK model
• SERVOPACK software version
• SERVOPACK special specifications
• SERVOPACK serial number
• SERVOPACK manufacturing date
• Servomotor model
• Servomotor serial number
• Servomotor manufacturing date
• Encoder model
• Rotary encoder resolution and linear encoder pitch resolution
• Encoder type
• Encoder software version
• Encoder serial number
• Encoder manufacturing date
• Option Module model
• Option Module software version
• Option Module special specifications
• Option Module serial number
• Option Module manufacturing date
With the Digital Operator, you can use Fn011, Fn012, and Fn01E to monitor this information.
Refer to the following manual for the differences in the monitor items compared with the Sig-
maWin+.
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
Monitor Items