Write Prohibition Setting For Parameters - YASKAWA SGD7S Product Manual

5.1 Manipulating Parameters (Pn)

5.1.4 Write Prohibition Setting for Parameters

5.1.4

Write Prohibition Setting for Parameters

You can prohibit writing parameters from the Digital Operator.
Even if you do, you will still be able to change parameter settings from the SigmaWin+.
Preparations
No preparations are required.
Applicable Tools
The following table lists the tools that you can use to change the Write Prohibition Setting and
the applicable tool functions.
Digital Operator
SigmaWin+
Operating Procedure
Use the following procedure to prohibit or permit writing parameter settings.
1.
Click the
2.
Select Write Prohibition Setting in the Menu Dialog Box.
The Write Prohibition Setting Dialog Box will be displayed.
3.
Press the
0000: Writing is permitted (default setting).
0001: Writing is prohibited.
4.
Click the Setting Button.
5.
Click the OK Button.
The setting will be written to the SERVOPACK.
5-8
Tool
Fn010
Setup - Write Prohibited Setting
Servo Drive Button in the workspace of the Main Window of the SigmaWin+.
or for the rightmost digit and set one of the following.
Function Reference
Σ-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
Operating Procedure on page 5-8