Operating Procedure - YASKAWA SGD7S Product Manual

8.4 Tuning-less Function

8.4.2 Operating Procedure

8.4.2

Operating Procedure

The tuning-less function is enabled in the default settings. No specific procedure is required.
You can use the following parameter to enable or disable the tuning-less function.
Pn170
When you enable the tuning-less function, you can select the tuning-less type. Normally, set
Pn14F to n.2 (Use tuning-less type 3) (default setting). If compatibility with previous mod-
els is required, set Pn14F to n.0 (Use tuning-less type 1) or n.1 (Use tuning-less
type 2).
Pn14F
Tuning-less Level Settings
If vibration or other problems occur, change the tuning-less levels. To change the tuning-less
levels, use the SigmaWin+.
 Preparations
Always check the following before you set the tuning-less levels.
• The tuning-less function must be enabled (Pn170 = n.1).
• The test without a motor function must be disabled (Pn00C = n.0).
 Procedure
Use the following procedure to set the tuning-less levels.
In addition to the following procedure, you can also set the parameters directly. Refer to
Related Parameters, below, for the parameters to set.
1.
Click the
maWin+.
2.
Select Response Level Setting in the Menu Dialog Box.
The Response Level Setting Dialog Box will be displayed.
8-12
Parameter

n. 0 Disable tuning-less function.

n. 1
Enable tuning-less function.
(default setting)
 
n. 0
Use for speed control.
(default setting)
Use for speed control and use host controller
 
n. 1
for position control.
Parameter
 
n. 0 Use tuning-less type 1.
Use tuning-less type 2. (The noise level is
 
n. 1
improved more than with tuning-less type 1.)
 
n. 2
Use tuning-less type 3.
(default setting)
Servo Drive Button in the workspace of the Main Window of the Sig-
Meaning
Meaning
When Enabled Classification
After restart Setup
When Enabled Classification
After restart Tuning